Last week I explained the benefits of mechanical ventilation assuming everyone understood what I was talking about, a common mistake from the trades. Several e-mails have asked for clarification of mechanical ventilation .

Exhaust ventilation- Removes the contaminant at it's source, like a bath fan or kitchen exhaust hood. While this qualifies as mechanical ventilation it is hardly optimal. Exhaust only leads to unbalanced pressures, drafts and potentialy unsafe backdrafting.

Supply Ventilation- Provides a means of introducing fresh air into the home to replace exhausted air and help with dilution of home contaminants. Traditionally a duct is ran from the cold air return of your HVAC system to the outside metered by a barometric damper or an electronic damper that opens and closes based on preset conditions. Of the two I prefer the electronic version. By bringing the air through the return we can condition and filter the air before it is introduced into the living area. Coupled with quality bath and kitchen exhaust fans this setup is effective and should be your minimum standard.

HRV/ERV- Stands for heat recovery ventilator and energy recovery ventilator. An HRV/ERV is a balanced exhaust system that runs the exhaust and intake air through a heat exchanger, pulling the heat out of our conditioned air before we send it outside. An ERV is the same setup that also pulls out humidity making it a great fit for hot humid areas. HRV's can be installed stand alone or tied into the duct system. Based on conditions set by your installer the unit will exhaust and replace the same volume of air with reduced heating/cooling load due to the heat exchanger. Another fantastic idea that I saw involves a remote mounted bath fan that pulls air from several bathrooms that ties into the ERV. Instead of sending that warm steamy air outside it is ran through the ERV.
Below is a generic diagram of a typical ERV.